Opens in a new tab
Season checklist

How to Tack a Sailboat: A Beginner’s Guide to Sailing Upwind

Sailboats can't point straight into the wind, but with a technique called tacking, any sailor can zig-zag their way to a destination upwind. Here's how to do it step by step.

Ask a new sailor to get from Point A to Point B when the wind is blowing straight from B to A, and most will assume it’s impossible. It isn’t. It just takes a specific technique. This guide walks through exactly how upwind sailing works in practice, from points of sail to your first tack.

Understand the Points of Sail First

Before you can sail upwind, it helps to know how a boat’s heading relates to the wind:

  • In irons / no-go zone: pointed directly, or nearly directly, into the wind. Sails luff and the boat has no forward drive.
  • Close-hauled: the tightest angle a boat can sail while still moving forward, usually 40-45 degrees off the wind. This is your upwind “gear.”
  • Close reach, beam reach, broad reach: progressively wider angles off the wind, each faster and easier to sail than close-hauled.
  • Running: sailing directly downwind, the opposite extreme from close-hauled.

Upwind sailing is done entirely on close-hauled headings, alternating sides.

Why You Zig-Zag Instead of Sailing Straight

Since no boat can point directly at an upwind destination, the workaround is to sail close-hauled at roughly 45 degrees to one side of the wind, then switch to close-hauled on the opposite side, alternating as needed. Each leg is called a tack, and the maneuver of switching from one tack to the other, turning the bow through the wind, is also called tacking.

String enough tacks together and you make real progress toward a mark that’s dead upwind, even though you’re never actually pointed at it.

Step-by-Step: How to Tack

  1. Check your surroundings. Before initiating a tack, make sure there’s no other boat, obstacle, or hazard on your new heading.
  2. Call “ready about.” This alerts your crew that a tack is coming and gives them time to prepare the jib sheets, releasing the working sheet, taking tension on the lazy sheet.
  3. Call “helm’s alee” (or “lee-oh”) and turn the tiller or wheel. This starts the bow swinging through the wind.
  4. Let the jib cross. As the bow passes through the wind, the jib will luff and swing to the new side, release the old sheet and begin trimming the new one.
  5. Settle onto the new close-hauled course. Trim the mainsail and jib for the new tack, and steady the boat back to roughly a 45-degree angle off the wind.
  6. Repeat as needed, alternating tacks until you reach your destination.

Tips for Smoother Tacks

  • Keep your speed up going into the tack. A boat that’s already moving well carries momentum through the turn; a slow boat can stall in irons and lose all forward drive.
  • Don’t turn too far. Aim to come out of the tack at a mirror angle to how you went in, over-turning wastes distance and speed.
  • Coordinate sheet handling with the turn, not before or after it: releasing the jib sheet too early lets it flog and lose control, too late and it fights the turn.
  • Keep the deck clear. Loose gear and slack sheets are the most common cause of a fouled, frustrating tack.
  • Practice in moderate wind first. Very light wind makes it hard to carry speed through the turn; very heavy wind makes mistakes more consequential. A steady 8-15 knot breeze is a forgiving place to learn.

Why This Matters Beyond the “Can They?” Question

Every offshore sailor eventually needs to make progress against the wind, whether it’s beating back to a harbor ahead of a storm or simply sailing a course that happens to point upwind. Tacking is a core sailing skill you’ll use on most outings.

Frequently Asked Questions

How close to the wind can a sailboat sail?

Most cruising sailboats can hold roughly 40-45 degrees off the true wind on a close-hauled course; racing boats with efficient sail plans can sometimes point a few degrees tighter.

What’s the difference between tacking and jibing?

Tacking turns the bow through the wind (used to sail upwind); jibing turns the stern through the wind (used when sailing downwind). Jibing happens faster and with more force on the sails, so it requires extra caution.

Can a beginner learn to tack in one lesson?

The basic mechanics, yes. Most sailing schools teach tacking in the first lesson or two. Smooth, fast tacks with a full crew take more practice to master.

Conclusion

Sailing against the wind is a repeatable skill built on close-hauled sailing and tacking. Learn the points of sail, practice the tacking sequence, and you’ll be able to confidently make headway toward any upwind destination, storm or no storm.

About the author

Jeremy Shantz